ELCOM

Configuration and parameterization software of the HERA station : ElCoM

The ElCoM software enables an Operator to edit and check the parameters of the HERA station, locally or remotely. The operator can also manually download the data stored in the UC board of the station. This software developed by ECM is both comprehensive and ergonomic, for quick and easy management. Finally, the software can also be installed on a tablet equipped with a Windows operating system.

In addition, a new function is used for remote display of the signals of the piezoelectric sensors. The Operator therefore has a view of the changes in the sensors installed in the road surface.

Key features :

OperationSpecificationsPicturesDocumentations

The software is used to perform all tasks locally or remotely, in order to :

Control and configure each card integrated in a HERA station,
Check the status of the automatic calibration by UD card,
Check the signals from the piezoelectric sensors,
Set the communication medium,
View road traffic real-time data (RTD = Real Time Data) in graphical, text or XML mode
Manually download the data stored in the SD card (via the CPU card),
Adjust the frequencies of the loops,
Update the firmware of each station card,
Change the classification of the vehicles,
Etc.

ElCoM is only compatible with the HERA Road Traffic Analysis Station.

Required configuration :

Operating system :

Windows XP,
Windows Vista,
Windows 7,
Windows 8,
Windows 10,

Processor : 3 GHz pentium processor or equivalent (Minimum).

RAM : 4GB (Minimum).

Hard disk : 500 MB of available space (Minimum).